Publicidad
Step 13
1
Start each screw a few turns before
BLACK 1-9/16" FLAT HEAD SCREW
D267
Groove
Fasten the DRAWER SIDES (D266 and D267) to the
å
SMALL DRAWER BACK (D440). Use two BLACK
1-9/16" FLAT HEAD SCREWS (30S).
3
D267
D441
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(2 used in this step)
Fasten the SMALL DRAWER BOX FRONT (D441)
å
to the DRAWER SIDES (D266 and D267). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
www.sauder.com/services
completely tightening any of them.
30S
(2 used in this step)
D440
D266
D266
30S
2
U n
fi n
D267
Be sure the SMALL
DRAWER BOTTOM
inserts into the SMALL
DRAWER BACK groove.
Slide the SMALL DRAWER BOTTOM (B32) into the
å
grooves in the DRAWER SIDES (D266 and D267) and
SMALL DRAWER BACK (D440).
4
The SMALL DRAWER
FRONT will over hang
the SMALL DRAWER
BOX FRONT.
D441
O
Fasten the SMALL DRAWER FRONT (O) to the SMALL
å
DRAWER BOX FRONT (D441). Use two BLACK 7/8"
LARGE HEAD SCREWS (17S).
418227
i s h
e d
s u
r f a
c e
B32
D266
D440
17S
BLACK 7/8" LARGE HEAD SCREW
(2 used in this step)
Page 17
Publicidad
