Linksys WPC54GS Guía De Instalación Rápida página 5

Ocultar thumbs Ver también para WPC54GS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
If the network utilizes wireless security,
you will need to configure security on
the Adapter. If not, you will be taken
directly to the Congratulations screen,
shown in Step B.
A
If wireless security has been
enabled on this network, you will
see a wireless security screen. If
your network utilizes WEP (Wired
Equivalent Privacy) encryption,
the WEP Key Needed for
Connection screen will appear. If
your network utilizes WPA-Personal
encryption, the WPA-Personal
Needed for Connection screen
will appear.
WEP Key Needed for Connection
Select 64-bit or 128-bit.
Enter a passphrase or WEP key.
Passphrase - Enter a passphrase
in the Passphrase field. This is
case-sensitive and should not be
longer than 16 alphanumeric
characters. It must match the
passphrase of your other wireless
network devices.
WEP Key - The WEP key must
match the WEP key of your
wireless network. For 64-bit
encryption, enter exactly 10
hexadecimal characters. For 128-
bit encryption, enter exactly 26
hexadecimal characters. Valid
hexadecimal characters are "0"
to "9" and "A" to "F".
Then, click Connect and
proceed to Step B.
WEP Key Needed
5

Publicidad

Tabla de contenido
loading

Tabla de contenido