Connect The Adapter; Connecting The Adapter - Linksys WPC54GS Guía De Instalación Rápida

Connect the Adapter

2
Now that the Setup Wizard has
prompted you to install the Adapter,
follow the instructions below.
A
Locate an available CardBus slot
on your notebook PC.
B
With the connector pin end
facing the CardBus slot and the
label facing up, slide the Adapter
into the CardBus slot until it locks
in place.
C
Windows 98 and Windows Me
users may need to restart their
PCs again when prompted to do
so.
D
The Power LED should light up
when the Adapter is installed
correctly.
E
Windows will begin copying the
driver files to your computer. If
Windows asks you for the original
Windows CD-ROM, insert the CD-
ROM, and direct Windows to its
correct location (e.g., D:\).
F
Once the Adapter is connected
and the Setup Wizard appears on
your screen, click Next on the
Connecting the Adapter screen
to proceed.
Proceed to Step 3.
Connecting
the Adapter
3