Cequent Performance Products 36600 Instrucciones De Instalación página 5

Install hitch - Raise hitch over the exhaust and into position aligning holes in
hitch with existing weldnuts in vehicle frame rail. NOTE: Make sure that vehicle
weldnuts are free from rust and debris. Install the M10 bolts and conical
washers (Teeth side toward hitch) with 16mm socket, (2) per side.
Re-attach exhaust and Underbody panels - Re-attach the exhaust onto the
three hangers removed in step 1. Reinstall the underbody panels using the
original hardware removed in step 2.
© 2017 Cequent™ Performance Products, Inc. -
Printed in Mexico
Tighten all M10 CL10.9 bolts with torque wrench to 42 Lb.-Ft. (57 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
Sheet 5 of 15 36600NP 4-5-17 Rev. A