Cequent Performance Products 76024 Instrucciones De Instalación página 5

Lower DEF tank - (BlueTec vehicles only) Remove the rearmost bolt holding the DEF
tank and the rearmost nut securing strap using a 13mm socket. Be sure to support the
DEF tank to prevent damage.
Trim heat shield – Trim and reinstall heat shields according to Figure 2. Use rib in panel as a
cutting guide. Note: Dimensions are approximate, confirm fit prior to trimming.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
Remove lower bumper bolts - Remove the lower (2) bolts securing the bumper to the
vehicle using a 10mm socket. Repeat for both sides.
Install hitch - Raise hitch into position, secure to the bumper beam studs using the
M10 nuts removed in step 6. Center the holes of the hitch with the bumper weldnuts.
Sheet 5 of 18 76024NP 5-5-16 Rev. A