Operation; Idle Mode; Setup Menu - Philips SJA9192/17 Manual Del Utilizador

Operation

Operation

IDLE MODE

When your Caller ID unit is in idle mode, the calls status and clock are
shown on the LCD display :

SETUP MENU

There are five options in the setup menu.
Set Language
Allows you to select the LCD display prompts in English, Spanish or
French. It is set at English when ex-factory.
1. During idle mode, press and hold [DIAL] button for about 3 sec-
onds.The LCD display shows "SETUP MENU
2. Press [REVIEW
3. Press [DIAL] button again.The LCD display shows "ENGLISH".
4. Press [REVIEW
French or Spanish.
5. Press [DIAL] button to save your setting and [REVIEW
to go to the next setting option SET AREA CODE.
Set Area Code
Area codes of all incoming calls will be compared with the area code
you entered to determine if it is a local call.
1. Press [DIAL] button when "SET AREA CODE" appears on the LCD.
The first digit of the 3- digit area code will blink.
2. Press [REVIEW
the first digit of your area code.
3. Press [DIAL] button to move on to the second digit.
4. Repeat steps (2) and (3) until you have entered your local area code.
5. Press [DIAL] button to save your setting and [REVIEW
to go to the next setting option SET TIME / DATE.
Note : If you want to change your area code, repeat the steps 1 - 4.
] button until "SET LANGUAGE" appears.
] or [REVIEW ] button to select English,
] or [REVIEW ] button to scroll digits to enter
EN
".
]button
] button
7