Nostalgia Vintage KPM330CART Instrucciones Y Recetas página 9

Assembly
Use provided tools for assembly: Wrench (K1), Wrench (K2), and Screw Driver (J).
1. Use 12 #4 Screws to assemble Top Cover (B), Bottom Plate (D) and Storage
Compartment (G) together. Make sure that the "X" on the Bottom Plate
is facing DOWN and the flat edge of the Top Cover faces forward.
2. Attach Push Handle (C) and Storage Compartment (G) using two #3 Screws,
two #11 Locking Washers and two #9 Nuts. Use Screws to attach Push Handle
to exterior of Storage Compartment. Use Locking Washers and Nuts on
interior of Storage Compartment to secure Push Handle.
3. Lift the upper piece of the Top Cover to fit the Door (F) into place. Use six #4
Screws to attach the Door (F) to the main compartment assembly in Step 2.
7