Metra 99-7806B Instrucciones De Instalación página 6

ISO DIN radio provision 1999-2003
1. Select radio housing A.
2. Secure the 1999-2003 radio housing to
the factory radio panel with the factory
hardware.
3. Cut and remove the mounting supports
from the front side of the radio brackets
(intended for 1996-1998 models).
(Figure A)
4. Secure the pocket to the radio brackets
with the (4) of the #8 x 3/8" Phillips
screws supplied. (Figure B)
5. Slide the radio into radio brackets and
secure with screws supplied with the
radio. (Figure C)
6
KIT ASSEMBLY
Remove shaded areas
(Figure A)
(Figure B)
6. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation.
7. Secure the the radio assembly to the dash
using the factory screws. Reassemble the
dash in reverse order of disassembly to
complete the installation.
(Figure C)
|
1.800.221.0932 MetraOnline.com