Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Acura RL 1996-1998
(without factory NAV)
1. Remove the carpet panels to the left and
right of the console and remove (1) screw
per side. (Figures A and B)
2. Remove the select lever cover by pulling
gently on both ends. The cover is
mounted on (4) clips. (Figure C)
3. Remove the shifter trim panel along
with the "not a lighter" pocket attached.
(Figure D)
(Figure A)
2

DASH DISASSEMBLY

(Figure B)
(Figure C)
(Figure D)
4. Remove (2) screws at the bottom of the
radio/climate panel. (Figure E)
5. Remove the air vents from the top of the
radio panel. (Figure F)
6. Remove (2) screws at the top that hold
A/C and radio panel in place. (Figure G)
7. Remove the radio/climate panel.
(Figure G)
8. Remove the (3) buttons from the factory
radio for re-use in Kit Assembly.
Continue to Kit Assembly
(Figure E)
(Figure F)
(Figure G)
|
1.800.221.0932
MetraOnline.com

Publicidad

loading