Kit Assembly - Metra 99-7806B Instrucciones De Instalación

ISO DIN radio provision 1996-1998
1. Select radio housing A.
2. Secure the pocket to the radio brackets
with (4) of the #8 x 3/8" Phillips screws
supplied and attach the radio brackets
to the climate controls with factory
hardware. (Figure A)
3. Secure the bracket/pocket assembly to
the housing/trim panel with (4) of the
included #8 x 3/8" screws. (Figure B)
4. Slide the radio into radio brackets and
secure with screws supplied with the
radio. (Figure C)
4

KIT ASSEMBLY

(Figure A)
(Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation. Insert the
(3) buttons from the factory radio panel
into the radio housing.
6. Secure the the radio assembly to the dash
using the factory screws. Reassemble the
dash in reverse order of disassembly to
complete the installation.
(Figure C)
|
1.800.221.0932 MetraOnline.com