Above Floor Cleaning - Bissell POWERGLIDE Guia Del Usuario

Operations

Above floor cleaning

1. Disconnect the main lower hose by
pressing the release latch and pulling up.
2. Remove extra reach stair hose from back
of vacuum.
NOTE: Remove crevice tool from inside of
extra reach stair hose before continuing.
3. Attach the extra reach stair hose to the end
of the main hose.
NOTE: Any of the cleaning tools will fit on the
end of this hose. Attach desired tool or follow
the next steps for even more cleaning reach.
4. Press the handle height adjustment lever
and remove the handle/wand.
5. Attach the opposite end of the extra reach
stair hose to the hose connection on the handle/
extension wand.
6. Attach desired cleaning tool to the end of
the handle/extension wand.
7. After above floor cleaning is complete, return
the extra reach hose to the back of the vacuum
and ensure the lower main hose is re-connected.
2.
4.
3.
5.
NOTICE
Ensure latch is fully engaged with the
extra reach hose.
1.
6.
www.BISSELL.com
7