Electrolux Cyclone Power Manual Del Usuario página 6

3
5
6
1
4
6
English
B E F O R E S TA RT I N G
2
1 Check that the filters are in place.
2 Insert the hose until the catch clicks to engage.
To release the hose, press the catch.
3 Attach the telescopic tube to the hose handle and floor
nozzle. See page 10 concerning the Back Saver
Twist and pull apart to dismantle.
4 Extend the electric cable and connect it to the mains. Press
the foot pedal to rewind the cable. (Take hold of the plug to
prevent it striking you.)
5 Press the On/Off button with your foot to start the vacuum
cleaner.
6 Adjust suction power by opening/closing the suction control
on the hose handle.
®
.