Steren RM-20 Manual De Instrucciones página 20

HOW TO USE THE QUICK PROGRAM METHOD
You can use the quick program with the enlisted codes, that you can
see on the next pages. If your device does not respond or is not
functioning properly, please try with each code listed for your brand. If
it's necessary, try the Search Method.
1.- Find the code for your device (Satellite, TV; DVD; VCR or Audio) in
the codes listed under Manufacturer's Codes.
2.- Manually, turn on a component (e.g. TV, VCR, etc).
3.- Press and hold the button of the desired component to program.
Then enter the first four-digit code for your brand of component.
4.- Release the buttons.
5.- Aim the remote control at the component and press On / Off button,
It should turn off. If this happen, write the code for future references.
Turn the component on, watch and keep that your device works properly
with the remote control. If your device does not respond or is not
functioning properly, please try with each code listed for your brand,
repeating from step 2 to 4. If it's necessary, try the Search Method.
Press each key within 10 seconds of the previous entry. Otherwise,
the remote control will exit the programming mode. Probably there
Este Kit es ideal para estudiantes o aficionados a la meca- are more than one code for your device, but only one of them will
control almost the total of functions, try to find the more
trónica ya que permite desarrollar la creatividad en la pro-
appropriated code for your brand. If you enter a wrong code, the
gramación de este prototipo de sistema mecatrónico. El Kit
red indicator light will flash 4 times, then will exit the programming
incluye todos los componentes necesarios para su armado.
mode.
ENGLISH-08