Elt Clip And; Onnecting The; Onnecting An Ptional; To The Handset - GE 21008 Guia Del Usuario

NOTE: The RBRC seal on the battery used in your ATLINKS
USA, Inc. product indicates that we are participating in a
program to collect and recycle Nickel Cadmium batteries
throughout the United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.
B

ELT CLIP AND

C

ONNECTING THE

1. To attach the belt clip, insert the sides of
the belt clip into the slots on each side
of the handset.
2. Snap the ends of the belt clip into
place.
C
ONNECTING AN
H
TO THE ANDSET
Each handset can be used with an optional
headset hands free operation.
1. Connect the headset to the
headset jack on the side of the
handset The handset receiver
and microphone are disabled
when the headset is connected.
2. Adjust the headset to rest
comfortably on top of your head
and over your ear. Move the
microphone to approximately two
to three inches from your mouth.
3. Press the talk/callback button to
answer a call or make calls using
the headset.
4. To return to normal operation, unplug the headset from the jack.
32
O H
PTIONAL
B C
ELT LIP
O H
PTIONAL EADSET
EADSET
Slot for
belt clip
Headset jack
Headset Plug
Belt clip
Slot for
belt clip