Publicidad
Idiomas disponibles
Idiomas disponibles
22. Select the Largest Step Washer from the Kit that Best Fits Your Bearing Application and Does Not Exceed the Outer Diameter of the Bearing.
23. Select the Adapter Sleeve that Best Fits Your Spindle Bearing Housing.
24. Assemble Tool Components (See Figure # 4), Begin Tightening the Tapered Nut and Washer Against the Bearing to Install New Bearing.
25. Hold the Tapered Nut While Turning the Pressure Screw. Continue Turning to Complete the installation of the New Bearing.
26. An Alternative Method to Installing New Inner Wheel Bearings. (See Figure # 5)
Support Plate 5
Figure 4
Bolt
Bearing
Spacer Ring 4
Adapter Sleeve
9, 10,11
5
Bearing Housing
New Bearing
Nut 2
Stepped Washer 5, 6, 6H,
7, 7H, 8, 8A,12, 13, 14
Publicidad
