Kohler K-18829 Guía De Instalación Y Cuidado página 11

Cleansing Seat Water Supply
(Optional)
5. Install the Water Supply
All Installations
IMPORTANT! An optional cleansing seat water supply is shown.
Only install a second water supply if you will install a cleansing
seat.
NOTE: The tank valve inlet uses G1/2 threads. If desired, install a
1/2" NPT adapter to the tank valve inlet.
Make sure that the rubber seal is inserted into the 1/2" NPT
adapter, if used.
Install a 1/2" NPT adapter, if desired, and tighten securely.
Install and connect the water supply lines.
Connect the waste pipe to the drain elbow.
Installations with a Cleansing Seat
IMPORTANT! The cleansing seat water supply shut-off must
extend from the finished wall between 3" (76 mm) minimum and 4"
Kohler Co.
1/2" NPT
Adapter
4" (102 mm)
Maximum Clearance
from the Front of
the Finished Wall
11
5/8"
(16 mm)
Max
1246750-2-C