Kohler K-18829 Guía De Instalación Y Cuidado página 17

Push Rod
Nuts
10. Install the Push Rods
Faceplates K-4177, K-5413, and K-8857: Thread the push rods into
the actuator assembly so they are flush with the finished wall.
All Other Faceplates: Thread the push rods into the actuator
assembly 1/2" (13 mm) behind the finished wall.
All Models: If needed, trim the threaded end of the push rods.
Secure the push rods in place with the push rod nuts.
Kohler Co.
Side View
Models
K-4177, K-5413, K-8857
Flush
Finished
Wall
Other Models
1/2" (13 mm)
Push Rods
Finished
Wall
17 1246750-2-C