Kohler K-18829 Guía De Instalación Y Cuidado página 13

Inlet
Hole
6. Install the Plaster Guards
Insert the plaster guards into the carrier inlet and outlet holes.
NOTICE: You will need the remaining parts after you complete the
finished wall. Retain these parts.
Set the actuator frame locking pins and bowl nut, washer, and
cap set inside the flush shield so they will be available later when
you open the flush shield.
Install the flush shield in the flush valve opening by snapping it
into place.
Kohler Co.
Flush Shield
Outlet
Hole
Plaster Guard
13 1246750-2-C