Special Functions; Care And Cleaning; Regular Cleaning - LG WM0742H A Serie Guia Del Usuario

H O W TO U S E

SPECIAL FUNCTIONS

The option buttons also activate special functions,
including CHILD LOCK, SPINSENSE™ and TUB
CLEAN. Press and hold the option button marked
with the special function for 3 seconds to activate.
CHILD LOCk
Use this option to prevent unwanted use of the
washer or to keep cycle settings from
being changed while the washer is
operating. Press and hold the DELAY
WASH button for 3 seconds to activate
or deactivate CHILD LOCK.
The lock icon will be shown in the display, and all
controls are disabled. The washer can be locked
during a cycle. Once CHILD LOCK is selected, the
display will alternate between CL and the
time remaining.
SPINSENSE™
SPINSENSE™ can be used to
help reduce or eliminate vibrations,
especially on wood floor installations.
To activate SPINSENSE™:
While the washing machine is running in any
cycle, press and hold the STAIN CYCLE button
for 3 seconds.
The STAIN CYCLE button light will blink while
the washer is running to show that SPINSENSE™
is active. The SPINSENSE™ function will remain
active for every cycle, even after a power failure.
To cancel SPINSENSE™:
Press and hold the STAIN CYCLE button for 3
seconds to turn off the SPINSENSE™ function.
TUB CLEAN
A buildup of detergent residue can occur in the
wash tub over time and can lead to
a mildewy or musty smell. The TUB
CLEAN cycle is specially designed to
remove this buildup. Press and hold
the EXTRA RINSE button for 3 seconds to activate
this cycle. The display will show a message to add
liquid bleach to the dispenser. After the cycle has
ended, open the door and allow the drum interior
to dry completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.

ALLERGIENE™
The ALLERGIENE™ cycle is a powerful, high temperature
cycle designed specifically to reduce certain allergens.
• Selecting the ALLERGIENE™ cycle automatically
incorporates steam into the wash cycle.
• The ALLERGIENE™ cycle can significantly reduce allergens
in bedding and clothing.
• The ALLERGIENE™ cycle helps reduce dust mite
populations and helps reduce allergens.
• Due to the higher energy and temperatures used, the
ALLERGIENE™ cycle is not recommended for wool, silk,
leather, or any other delicate or temperature sensitive items.
HAND WASH/WOOL
• Only woolen items that are designated as
"Machine-Washable" should be washed in this
washing machine
• Wash only small loads for optimum fabric care
(less than 8 lbs.)
• Only neutral (wool safe) detergents should
be used (Only a small quantity of detergent
is needed due to the small load size and low
volume of water in the cycle.)
• The HANDWASH/WOOL cycle uses a gentle
tumble action and low speed spin for ultimate
fabric care
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
products are washed according to the instructions
on the garment label and those issued by the
manufacturer of this washing machine, M0708.
Certified by NSF
Certificado por NSF
NSF International (formerly the National Sanitation Foundation),
certifies that SANITARY cycle reduces 99.9% of bacteria on
laundry, and none of bacteria will carry over onto the next laundry
load.

REGULAR CLEANING

wWARNING:
• Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning
can cause serious injury, fire, electrical shock, or death.
• Never use harsh chemicals, abrasive cleaners, or solvents to clean washer. They will damage the finish.
Cleaning the Exterior
Proper care of your washer can extend its life. The
outside of the machine can be cleaned with warm
water and a mild, nonabrasive household detergent.
Immediately wipe off any spills with a soft,
damp cloth.
IMPORTANT: Do not use methylated spirits,
solvents, or similar products.
Never use steel wool or abrasive cleansers; they
can damage the surface.
Care and Cleaning of the Interior
Use a towel or soft cloth to wipe around the
washer door opening, door seal, and door glass.
These areas should be kept clean to ensure a
watertight seal. Be sure to wipe under the inside
rubber seal to remove any moisture or soil.
Always remove items from the washer as soon
as the cycle is completed. Leaving damp items
in the washer can cause wrinkling, color transfer,
and odor.
Run the TUB CLEAN cycle regularly to remove
detergent buildup and other residue.
Cleaning the Steam and Water
Circulation Nozzles
Use a cotton swab to remove lime or detergent
buildup from the inside of the steam and water
circulation nozzles. NEVER use a sharp or
pointed object; you could damage the nozzles.
Removing the Stain in Door Seal
NOTE: Wear rubber gloves and eye protection
while performing the following procedure:
1 Dilute 3/4 cup (177 ml) liquid chlorine bleach
with 1 gallon (3.8 L) of warm/hot water.
2 Use this solution to wipe down all surfaces
of the gasket to remove the deposits that are
causing any odor. (Be sure to fold back the
lip of the gasket to get under the edge where
residue can build up.)
3 Wipe the gasket with a dry cloth.
C A R E A N D C L E A N I N G
Leave the door open to allow the gasket to
4
dry completely. Do not use undiluted bleach
as this will damage the gasket. Follow the
manufacturer's instructions for proper use
of bleach. If the gasket cannot be cleaned
properly, it should be replaced.
Storing the Washer
If the washer will not be used for an extended
period of time and is in an area that could be
exposed to freezing temperatures:
1 Turn off water supply tap.
2 Disconnect hoses from water supply and
drain water from hoses.
3 Plug the power cord into a properly grounded
electrical outlet.
4 Add 1 gallon of nontoxic recreational vehicle
(RV) antifreeze to the empty wash drum.
Close door.
5 Select the spin cycle and let washer spin
for 1 minute to drain out all the water.
NOTE: Not all of the RV antifreeze will be
expelled.
6 Unplug the power cord, dry the drum interior
with a soft cloth, and close the door.
7 Remove the inserts from the dispenser. Drain
any water in compartments and dry the
compartments.
8 Store the washer in an upright position.
9 To remove the antifreeze from the washer
after storage, run washer through a complete
cycle using detergent. Do not add laundry!
Removing Lime Buildup
If you live in an area with hard water, lime scale
can form on internal components of the washer.
Use of a water softener is recommended in areas
with hard water. If a descaler is used, make sure
that it is suitable for use in a washer, and run the
TUB CLEAN cycle before washing clothing.
Lime scale and other spots may be removed
from the stainless steel drum using a stainless
steel cleaner. Do NOT use steel wool or abrasive
cleansers; they can damage the surface.