Bluetooth Pairing; Button Controls - Soundcore Flare 2 Manual De Instrucciones

Bluetooth Pairing

1
<2"
Press
Flashing blue
Steady blue
• When powered on, the speaker will automatically connect to the last connected
device if available within the Bluetooth range. If not, press the Bluetooth button
to enter the Bluetooth pairing mode.
• To pair with another device, press the Bluetooth button to re-enter the pairing
mode.
PartyCast Mode
Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare
2 speakers to control audio and all the light effects.
Set up the primary speaker:
1. Connect one Flare 2 speaker to your phone or other devices via Bluetooth. When
successfully connected, the Bluetooth LED will turn blue.
2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and
the Bluetooth LED flashes white to indicate this Flare 2 is the primary speaker.
• The Bluetooth LED on the primary speaker will keep flashing white.
Connect with secondary speakers:
1. Make sure the secondary speakers aren't connected to any Bluetooth devices.
EN 03
2 3
Soundcore Flare 2
Soundcore Flare 2
Enter Bluetooth pairing mode
Bluetooth pairing
Bluetooth connected
• Press the Bluetooth button to disconnect Flare 2 from a device, the Bluetooth
LED will flash blue.
2. Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED
flashes white to indicate the secondary speaker is in connection mode.
3. When the secondary speakers are close to the primary speaker, they will connect to the
primary speaker automatically. When successfully connected, the Bluetooth LED on the
primary speaker will continue flashing white, while on the secondary speakers will turn white.
Soundcore Flare 2
1
Soundcore Flare 2
When successfully enter the PartyCast mode:
• you can power off, adjust the volume, or switch light effects for all speakers by controlling
the primary speaker only;
• you can power off or switch light effects for each secondary speaker individually;
• you can't adjust the volume for each secondary speaker individually;
• to exit the PartyCast mode, press the Bluetooth button either on the primary speaker or
on the primary speaker for 3 seconds until the Bluetooth LED flashes blue.

Button Controls

Play / Pause
Next track
Previous track
Bass Boost On / Off
2
>3"
Press
X1
Press twice
X2
Press thrice
X3
Press
X1
04 EN