Function Buttons - Honeywell CL201AE Manual Del Propietário

USE & OPERATION

Function Buttons

POWER
Press the POWER button to turn the unit on. The cooler will
start automatically at medium speed. After a few seconds the
POWER
speed will switch to low. To turn the unit off, press the button
again.
SPEED
Press the SPEED button repeatedly and the speed will
change. The indicator light will show the selected speed.
HIGH
MED
LOW
HIGH MED LOW
SPEED
COOL
To begin cooling the desired area, press the COOL button.
The indicator light will come on and the water pump will
operate. You will feel the cooler air after the Honeycomb COOL
Cooling Media is completely wet.
9