Sauder 417772 Manual De Instrucciones página 13

Step 9
Carefully turn your unit over onto its front edges. Unfold
å
the BACK (G) and lay it over your unit.
Make equal margins along all four edges of the BACK (G).
å
Push on opposite corners of your unit if needed to make
it "square".
Fasten the BACK (G) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
å
over the UPRIGHTS (C and D).
NOTE: Perforations have been provided for access
å
through the BACK. Carefully cut out the holes needed.
These large holes must be
closer to the bottom edge.
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
NAIL
(44 used in this step)
These holes must line up over
the UPRIGHTS (C and D).
G
1N
Page 13