Alpinestars Tech-Air 5 Guia Del Usuario página 14

For this kind of certification, the product markings are as follows:
Name of the
Manufacturer
Product
Identification Code
Indicates that
the product is for
motorcycle use
Indicates that the
product meets
Central Back, Level
1 requirements
Protection Level
The following table summarize and explain the performance level reported on the product
marking as a passive impact protector:
Standard
Tested Area Used for Temperature
tests
1621-
Central Back 20°
2:2014
The EU Declaration of Conformity of this PPE (as established by the REG. EU 2016/425) can
be downloaded at: eudeclaration.alpinestars.com.
Pyrotechnic Articles
The Tech-Air® 5 System contains two pyrotechnically activated cold gas inflators, and as
such, the whole item is considered as an "AIRBAG MODULE" category P1 under EU Directive
2007/23. As such a EU Type Examination (Module B) has been conducted on the design of
the System, and a EU Type Examination and Audit (Module E) has been conducted on the
assembly of the System.
The EU Type Examination and Audit have been conducted by Notified Body #0080, Ineris,
Parc Technologique ALATA BP2, Verneuil-en-Halatte, 60550, France.
Electromagnetic Stability
The Electronic Unit of the Tech-Air® 5 System has been tested according to different
regulations for electronic and radio devices.
FCC compliance Statement:
The System has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
26 EN
Protector Size
(Waist to
Shoulder)
Indicates that
the product has
been tested
according the
1621-2:2014
standard
Level
Level 1 requirements:
average value ≤ 18kN; No
Force
impact above 24kN
Transmitted
Level 2 requirements:
average value ≤ 9kN; No
impacts above 12kN
Average 10.05kN
Level 1
Peak 18.98kN
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! Changes or modifications not expressly approved by Alpinestars
could void the user's authority to operate the equipment. (Part.
15.21).
FCC ID: S9NSPBTLERF
Canadian compliance Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to RSS-210 of the IC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment. (RSS-210)
IC: 8976C-SPBTLERF
EU compliance Statement:
Tech-Air® 5 System contains a Bluetooth Low Energy Radio Module, with the following
characteristics:
Frequency Band 2402÷2480 Mhz
Rated Output Power 0.002344 Watts
Alpinestars SpA hereby declares that this wireless device is in compliance with the Directive
2014/53/EU. A copy of the EU Declaration of Conformity is available at eudeclaration.
alpinestars.com
27 EN