essentiel b ERBT 2 Manual De Utilización página 33

• Gently press the feed tube pusher (7) when you insert the food.
Assembling the blender (10)
1. Place the food in the blender jar (10).
2. Place the measuring cap (12) on the lid, turn it clockwise
to lock it and then place the lid on the blender jar.
3. Place the blender jar (10) on the motor unit (1), in the slots
provided for this purpose, and then and turn clockwise
to lock it.
4. Turn the appliance on by turning the on/off button and
setting it to a speed suitable for the preparation (refer to
the "selecting the appropriate speed for each accessory"
table). Use the "Pulse" function to mix by pulsing.
N :
To use the "Pulse" function, you must first select a
ote
speed.
N
: The blender will not start if the blender jar (10) and its
ote
lid (11) are not properly fitted on the motor unit (1).
Using the blender (10)
• You can only insert ingredients while the blender is running
through the opening of the measuring cap.
• Scrape thick mixtures (such as dough or thick sauces for
starters) from the walls with a spatula when the blender
is stopped and unplugged from the power point. If the
mixture is too thick, add liquid.
• To crush ice, use the "Pulse" function.
• Do not store your preparations in the blender. The blender
is not a storage container. Empty the blender jar and wash it after each use.
• Never mix more than 1.8 litres - less for thick liquids such as milkshakes.
Pulse
33
V.1.0
use