AC VOLTAGE
Input impedance: 10Mohm
Protection against overcharge: 200mV range: 250Vcc or rms AC,
ranges from 2 to 700Vac: 1000 Vcc or 700Vac rms
Frequency range: 40 top 400MHz
Response: Average calculated in rms sine wave
Maximum voltage input: 700Vac rms
In the range of small voltages, the meter can give unstable
In the range of small voltages, the meter can give unstable
readings when the points still don't reach the circuit, this
readings when the points still don't reach the circuit, this
process is normal, because the meter it's very sensitive.
process is normal, because the meter it's very sensitive.
When the points touch the circuit, the meter will shows the
When the points touch the circuit, the meter will shows the
real reading.
real reading.
DC CURRENT
Protection against overcharge: Ranges from 2 to 200mA: F1:
200mA fuse 200mA / 250Vcc (fast fusion, <2ohm resistance) 10A
range: F2: 10 A / 250V fuse (fast fusion).
Maximum current input: mA connector: 200mA, 10 A connector:
10A
Voltage loss: 200mA
AC CURRENT
ENGLISH-5