Dash Disassembly - Metra 95-7359B Instrucciones De Instalación

1. Unsnap and remove trim from
around top center to passenger
side dash. (Figure A)
2. Unsnap panel from outside edge of
driver's side dash. (Figure B)
3. Remove two screws from knee
panel and pull top of panel back so
it doesn't overlap the instrument
cluster. (Figure C)
4. Remove (2) screws from the
driver's side vent trim and remove.
(Figure D)
(Figure A)

Dash Disassembly

(Figure B)
(Figure C)
(Figure D)
95-7359B
5. Remove(4) screws from instrument
cluster and remove. (Figure E)
6. Remove (4) screws from the
climate controls and remove.
(Figure F)
7. Remove (6) screws securing the
radio trim panel and remove.
(Figure G)
8. Remove (4) screws securing the
factory radio chassis and remove
it. (Figure H)
Continue to kit assembly
(Figure E)
2
(Figure F)
(Figure G)
(Figure H)