Kalorik USK BL 2 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the
requested breaks. Failure to follow this instruction carefully may result
in damage to the motor. The maximum continuous usage time is 3
minutes. After 3 minutes of continuous use, you should insert a break
of at least 10 minutes.
ASSEMBLY OF THE BLENDER AND USE
CAUTION!
Your appliance is fitted with a security device on the pouring jar
allowing the functioning of the appliance only when the jar and its
lid are correctly placed on the motor base. If those conditions are
met and the appliance does not start, call your after sales service.
Assemble the pouring jar on the motor block by turning it from a
quarter run anticlockwise until it stops. To check if it has been
done correctly, it should be possible to raise the motor block with
de handle of the pouring jar.
Fill the pouring jar with the chosen ingredients.
Screw the lid until it stops.
Plug in the appliance.
Select the speed that is most suitable for the ingredients you want
to process.
The button "P" (Pulse) allows a manual operation because you
have to keep pushing it when functioning. This position is
generally used to crush ice.
Press button 1 (minimum speed) for mainly liquid ingredients.
Press button 2 (medium speed) for combinations of liquid and
solid ingredients.
Press button H (maximum speed) for mainly solid ingredients.
It is also possible to add liquids or other ingredients anytime
without stopping the appliance. You only have to remove the
stopper, which closes the lid opening by turning and raising it
straight up.
Once you have finished the preparation, press button "0" to stop
the appliance and unplug the appliance.
5
USK BL 2 - 051107

Publicidad

Tabla de contenido
loading

Tabla de contenido