IMPORTANT SAFETY INSTRUCTIONS
ELECTRIC SHOCK HAZARD
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
• Do not push objects into apparatus vents or slots because fire or
electric shock hazards could result.
• Maintain a minimum distance of at least 6 inches around apparatus
for sufficient ventilation.
• Ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table clothes, curtains,
etc.
• No naked (open) flame sources, such as lighted candles, should be
placed on or near
the apparatus.
• Place apparatus in a stable location so it will not fall causing
product damage or bodily harm.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
EXPLANATION OF SYMBOLS:
Placed on the product to mean...
Caution, refer to accompanying documentation
before proceeding. This symbol would then be located
in the manual section adjacent to the marking that
refers tothe area of concern.
2
English
CAUTION
• Operate the apparatus only from a low level audio line output.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
• Only use attachments/accessories specified by
the manufacturer.
• Unplug this apparatus during lightning storms or when unused for
long periods of time.
• Refer all servicing to qualified service personnel.Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall be disconnected from the mains by placing the
power/standby switch in the standby position and unplugging the
power cord of the apparatus from the AC mains receptacle.
• The socket-outlet shall be installed near the equipment and shall
be easily accessible.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.
Placed on the product to mean...
Warning, access to this area is restricted. Failure to
comply could result in an electrical shock hazard.
Thank you for purchasing a Logitech
®
Pure-Fi Anywhere
In The Box
1. Logitech
®
Pure-Fi Anywhere
™
2 speaker system
2. Wireless remote
3. Protective travel case
4. Universal Dock adapters
5. International voltage AC adapter (100 – 240V)
Universal Dock adapters
are Identified by Number
™
2.
Attach a Universal Dock adapter
1. Select the Universal Dock adapter for your iPod
or iPhone. Use the chart below to choose the
correct adapter. If your iPod or iPhone is not listed,
an adapter should have been included when you
purchased it.
2. Plug the Universal Dock adapter into your Logitech
Pure-Fi Anywhere
™
2.
3. Plug your iPod or iPhone into the Universal Dock.
®
3
English