Replacing The Filters - Sanitaire TRACER SC7100A Guia Del Usuario

1622520_rev1_SC7100A.qxp_English 1/17/20 1:06 PM Page 10
Replacing the filters
Slide the filter onto the separator.
Removing and cleaning the brush roll
If the brush roll jams during use, the
vacuum will stop and the LEDs will
appear red. Before checking for a
blockage, remove the battery.
NOTE: The brush roll should be pulled first from the side near the
release button.
10 www.SanitaireCommercial.com
Slide the filter back into the dirt bin.
Rest the vacuum on its side and
locate the brush roll release button.
Press and hold the release button
and pull out the brush roll.