1622520_rev1_SC7100A.qxp_English 1/17/20 1:06 PM Page 12
4 red LED lights
If the brush roll jams during use, the
vacuum will stop working and the
4 LED lights will appear red. You will
need to remove the battery first, and
then remove the brush roll to clean it.
12
www.SanitaireCommercial.com
10
seconds
The vacuum will not re-start until the
red LED lights go out. It should take
approximately 10 seconds for the red
lights to turn off after the brush roll
has been removed, cleaned, and the
jam is cleared.