GE ADQ12 Manual Del Propietario E Instrucciones De Instalación página 13

4 PREPARE THE CASE
Install the top mounting rail with 4 Type A
A
screws from the outside of the case.
Top mounting rail
Remove the backing from a side mounting
B
rail seal strip and attach it to the flat side of
a side mounting rail. Repeat for the other
seal and rail.
Side mounting
rail seal strip
Install the side mounting rails using 5 Type
C
A screws, from the outside of the case, on
each side.
Installation Instructions
Type A
screws
Side mounting rail
4 PREPARE THE CASE (CONT.)
Insert the sliding accordion panels into the
D
side mounting rails of the air conditioner.
Slide the top and bottom accordion panel
E
rails into the top and bottom mounting rail
channels.
13