Sauder New Grange 420021 Manual Del Usuario página 21

Step Step 16
Carefully stand your unit upri ht and position the unit in its fi nal location. We recommend usin the SAFETY
å
STRAP (60M) for added stability.
Pull the loose end of the SAFETY STRAP (60M) throu h the hole in the LARGE BACK (N).
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR (61M) into a wall stud. If you prefer to fasten the
å
SAFETY STRAP (60M) to a wall stud, o to your local hardware store for proper hardware.
INSTALLATION INSTRUCTIONS:
å
1. Insert the SAFETY DRYWALL ANCHOR (61M) throu h the WASHER (13M) and the loose end of the SAFETY STRAP (60M).
2. Usin a Phillips screwdriver or a hand drill, press the screw sli htly onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips throu h.
4. Turn the screw until it is fl ush a ainst the wall and you feel a fi rm resistance.
5. Continue to turn until the screw starts spinnin freely.
NOTE: Before movin your unit to a di erent location, unscrew the SAFETY DRYWALL ANCHOR (61M) from your wall.
å
The nylon sheath will remain behind your wall.
www.sauder.com/services
N
This end is
fastened to
the TOP.
420021
13M
61M
60M
Pa e 21