18 | English
Cordless Drill/Driver
Permitted ambient temperature during opera-
C)
tion
and during storage
Recommended rechargeable batteries
Recommended battery chargers
A) Measured at 20−25 °C with rechargeable battery PBA 18V 1.5Ah.
B) with adapter
C) Limited performance at temperatures <0 °C
D) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-1, EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN 62841-2-1, EN 62841-2-2:
h
Drilling in metal:
a
h
K
Screwdriving:
a
h
K
Impact drilling into concrete:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1 609 92A 66Z | (17.11.2020)
AdvancedImpact 18
°C
D)
Advan-
cedIm-
pact 18
QuickSnap
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
Drill chuck
QuickSnap
adapter
–20 to +50
–
PBA 18V...W-.
–
AL 18...
–
Drill chuck
Off-set
adapter
angle ad-
apter
70
88
70
81
99
81
3
5
3
–
<2.5
–
–
1.5
–
<2.5
<2.5
<2.5
1.5
1.5
1.5
–
19.0
–
–
2.0
–
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Off-set
Angle screw
angle ad-
adapter
apter
–
–
–
–
–
–
Angle
Drill chuck
screw ad-
adapter +
apter
angle
screw ad-
apter
70
70
81
81
3
3
–
<2.5
–
1.5
<2.5
<2.5
1.5
1.5
–
–
–
–
Bosch Power Tools