Technical Data; Noise/Vibration Information - Bosch GSB 120-LI Professional Manual Original

(11) "PowerLight"
a)
(12) Screwdriver bit

Technical Data

Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation and dur-
ing storage
Recommended rechargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 12V 2.0 Ah.
B) Measured with GBA 12V 2.0 Ah and GBA 12V 6.0 Ah.

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1:
h
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Bosch Power Tools
(13) Universal bit holder
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
-1
min
-1
min
B)
kg
°C
°C
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
English | 15
a)
GSR 120-LI GSB 120-LI
3 601 JG8 0.. 3 601 JG8 1..
12
0–400
0–1500
0.97–1.2
0 to +35
–20 to +50 –20 to +50
GBA 12V... GBA 12V...
GAL 12...
GAX 18...
GSR 120-LI GSB 120-LI
67
78
5
< 2.5
1.5
–
–
1 609 92A 7XA | (23.06.2022)
12
0–400
0–1500
1.1–1.3
0 to +35
GAL 12...
GAX 18...
83
94
5
< 2.5
1.5
10.5
1.5