Using The Minitek Transmitter - Siemens Tek Manual De Instrucciones

Using the miniTek transmitter

① On/off switch
② Sound level
③ Socket for power plug
④ 2.5 mm stereo socket
⑤ LED
Before first use
• Charge transmitter before first use.
Charging the transmitter
• Connect the transmitter with the power plug to a power supply.
While charging the LED shines red.
Charging time is about 5 hours depending on the status of the
rechargeable battery.
Turning the transmitter on/off
• Use the on/off switch to turn the transmitter on.
The LED flashes blue while searching for a connection to the
miniTek, then the LED shines blue.
• Use the on/off switch to turn the transmitter off.
Turn the transmitter off when it is not in use.
Sound level
• Press the sound level button to change the volume of the
audio signal.
The LED flashes blue. The number of times the LED flashes
(up to 5), indicates the volume level.
18
All manuals and user guides at all-guides.com
e r
P o w
Receiving the audio stream from an
external device
Transmitter
6.3mm Stereo
Plug (large)
(for headphone
jack on stereo) MP3
STEREO
STEREO
P
2.5mm Stereo Plug (small)
(for miniTek Transmitter)
3.5mm Stereo Plug (medium)
(for external devices)
RCA Left (white)
Right (red)
Stereo Plugs
(plug into back of TV,
Stereo, or DVD/VCR Player)
DVD/VCR TV
19