Basic Functions - Siemens Tek Manual De Instrucciones

Fig. 7: Display information
The remote control will go into a stand-by mode when not in
use. In stand-by mode, no information is shown on the display.
Press any key to turn the remote control back into active mode
to see the information on the display.
Wearing the remote control
• For best results, use the remote control at a maximum
distance of 1 meter or less to the hearing instrument(s). The
remote control can be operated from your pocket, when
changing memory, volume control or treble preference.
• When receiving an audio stream, for best listening quality,
wear the remote control with the lanyard around your
neck. This will ensure that the remote control and hearing
instrument(s) are optimally positioned.
• You can also set the remote control on the table in front of
you, or on the couch or chair next to you, for example, when
watching TV.
• For best listening quality turn the remote control in the same
direction you are facing.
• When using the telephone with the remote control, hold the
28
All manuals and user guides at all-guides.com
remote control in your hand or place in front of you on a table
and speak directly into the microphone, or wear the remote
control with the lanyard around your neck.
Fig. 8: Wearing, watching TV, listening and talking
with your Tek remote control.
Tek basic functions
Locking the remote control
Lock
Fig. 9: Lock and unlock
Your remote control has a lock on the left side.
• Slide the control to the bottom to enable the lock.
Pressing the buttons will now have no effect.
• Slide the control to the top to disable the lock.
Green
section
Unlock
29