Siemens Tek Manual De Instrucciones página 17

Changing the program
The remote control allows you to control up to 6 programs of
your hearing instrument(s).
Your Hearing Care Professional will program the settings in the
different programs for your particular listening needs.
Programs
Fig. 10: Remote control programs and volume
Press the number of the desired hearing program. The remote
control display will show the number and name of the program
you are in. You will hear the acoustic signal for the chosen
program in your hearing instrument(s). (Fig. 10)
Changing the volume (Fig. 10)
• Press for louder.
/
• Press for softer.
/
/
/
/
Changing the treble (Fig. 11)
/
With the rocker switch on the right side of the remote control
you can change the tone of your hearing instrument(s).
• Press + (up) for more treble.
• Press – (down) for less treble.
30
/
/ /
All manuals and user guides at all-guides.com
Volume
/
Treble
button
Fig. 11: Treble, read out, and remote
control on/off buttons
Read out the hearing instrument information
This function allows you to view the current battery status,
volume and hearing program of your hearing instrument(s).
• Hold the remote control close to your hearing instrument(s)
(about 10 cm).
• Briefly press the read out button. (Fig. 11)
The display of the remote control shows you the
following information: (Fig.12)
1 current hearing program
with description
2 treble setting of hearing
instrument(s)
3 volume control setting of hearing
instrument(s)
4 battery status of hearing
instrument(s) left/right
Read out
button
Remote control
on/off
Fig. 12: Display
31