Recording Device Setup - RCA SCENIUM DVR2080 Manual Del Usuario

Tabla de contenido

Idiomas disponibles

Overview & Setup

Recording Device Setup

To record digital content to the DVR, you may need to set up the Recording Device screen from

the TV's Connections menu. Use the MENU button on the TV's remote control to access the

Connections menu and set up the DVR as a preferred recording device through the DTVLink (1394)

connection.

1. Press TV button on the TV remote to put the remote into TV mode.

2. Press MENU on the TV's Remote control.

3. Use the Down Arrow to highlight Connections and press OK or right arrow (4) on the

remote.

4. Highlight DTVLink Setup and press OK or right arrow (4) on the remote.

5. Highlight Recording Device and press OK or right arrow (4) on the remote.

Note: The "DTVLink Connect" menu is for recognizing and configuring some DTVLink devices, that require an

additional analog connection, and does not pertain to the DVR.

�

��

�

��

Channel Search

The Recording Device screen conveys to the TV which DTVLink component is capable of receiving

transport commands (e.g., Record, Play, etc.) when a DTVLink component is not currently being

tuned. With this screen, you can select the default DTVLink recorder and the functionality level

for a DTVLink recording device. When the DVR is connected and powered on, it appears at the

top of the screen. If you have more than one DTVLink recording device, you may need to highlight

the Recording Device field at the top of the screen. Press OK to scroll through the DTVLink

components and select the DVR you would like to be the default recording device for digital.

Illustrations contained in this document are for representation only.

��

Chapter 1

Tabla de Contenido

Tabla de contenido

Scenium dvr2160