PEERLESS ACCSH100 Instalación Y Montaje página 6

Installing Shelf to Column
2
Slide shelf attachment clamp (D) into column (A) and reattach end cap onto column (A) as
shown in fi gure 3.1.
3 Attach support clips (L) to shelf bracket (J) and slide to desired position as shown in fi gure 4.1.
Securely tighten all set screws using the 2.5 mm allen wrench (N). Do not overtighten screws.
NOTE: Set screws may already be attached to support clips.
For ACCSH100 and ESHV10 models, continue to step 5. For ACCSH200 and ESHV20 models,
skip to step 6.
A
fi g. 3.1
J
SET SCREW
fi g. 4.1
6 of 27
END CAP
D
L
ISSUED: 01-17-11 SHEET #: 083-9013-1