Remote Control - Steren 208-900 Manual De Instrucciones

5. Insert the power cable in the tuner and connect the other end
to the home power source.
It is possible that when you power the receiver on, the LED It is possible that when you power the receiver on, the LED
indicator is blinking. If this happens, disconnect the power indicator is blinking. If this happens, disconnect the power
adaptor and connect it again. The LED indicator should adaptor and connect it again. The LED indicator should
illuminate red. illuminate red.

REMOTE CONTROL

1.- Power
Powers the device on/off
2.- Alphanumeric buttons
Allows you to access a channel directly
3.- Channel + / -
Changes to the next / previous channel
4.- Volume + / -
Set the volume level
5.- Mute
Activates and deactivates the audio output
6.- Previous channel
Skips directly to the previous viewed channel
7.- Favorites
Allows you to store your favorite channels by groups
ENGLISH-6