Steren 208-900 Manual De Instrucciones página 9

SELECTION OF OPTIONS AND CONFIRMATION
In order to access the different options on the menus, use the
right arrow key.
In order to return to the previous screen, in some menus you will
need to use the left arrow key or the EXIT button.
In order to confi rm an option, press the right arrow key or the OK
button on your remote control
In order to move amongst the different menus, options, and
sub-menus, use the arrow keys.
USING THE TUNER FOR THE FIRST TIME
1. Power your TV on
2. Power your tuner on
3. On the monitor you will not receive any video signal.
4. Press the SCAN button on the remote control
5. The TV will display the following screen:
6. Use the arrow keys in order to select YES and begin the
channel search of HDTV signals in your area
7. Once the search has fi nished, the TV will display one of the
stored channels.
8. Use the Channel + / - buttons in order to change the channel
9. When you have fi nished using the tuner, power the tuner off.
It is possible that the HD channels are not available in all It is possible that the HD channels are not available in all
areas areas
It is possible that when you power the receiver on, the LED It is possible that when you power the receiver on, the LED
indicator is blinking. If this happens, disconnect the power indicator is blinking. If this happens, disconnect the power
adaptor and connect it again. The LED indicator should adaptor and connect it again. The LED indicator should
illuminate red. illuminate red.
ENGLISH-9