Indel Webasto Marine Isotherm Cruise Classic Instrucciones Para La Instalación Y El Uso página 59

CR 130 527
CR 130 ELEGANCE 528
CR 130 DRINK 527
CR 195 550
CR 200 730
CR 36 INOX 453
CR 63F INOX 495
CR 65F INOX 545
CR 90F INOX 545
CR 130D INOX 545
CR 160 INOX 626
CR 195 INOX 545
CR 200 INOX 730
CR 320 INOX 628
REM: the product is provided with the possibility of moving the compressor unit based on the length of
the supplied hoses.
Note(1) depth that takes into account the curvature of the tube at the point of tube exit from the trunk
"D"=35mm
Note(2) depth that takes into account the curvature of the tube in the case of remote control "D"=80mm
(the tube is very rigid)
FOR AC/DC VERSIONS, KEEP IN MIND THAT, DUE TO LACK OF SPACE, DEPTHS EXCEEDING 50 mm WILL
HAVE TO BE EVALUATED ON A CASE BY CASE BASIS.
AS PER REGULATIONS AND FOR PROPER OPERATION, THE WALLS OUTSIDE OF THE REGRIGERATOR
SHOULD BE SET AT THE FOLLOWING DISTANCES FROM THE INTERNAL WALLS OF THE UNIT: 20mm ON
WALLS WHERE THE COMPRESSOR IS NOT PRESENT AND 50MM ON THE WALLS WHERE THE COMPRESSOR
IS PRESENT. IF THESE RULES CANNOT COMPLIED WITH, THE MINIMUM DISTANCE MEASUREMENTS MUST
BE 5mm AND THE MATERIALS WITH WHICH THE WALLS ARE MADE MUST BE EXPLOSION PROOF.
58
746 505 40
746 505 50
746 520 40
1345 580 /
880 620 /
255 580+135(1) /
620 555 /
610 580 /
743 555 /
743 560 /
870 610 /
1345 580 /
868 620 /
1790 610 /
User Manual
531:751 /:/:10:/
530:751 /:/:9:/
531:751 /:/:10:/
555:1350 35:35:30:/
735:890 20:20:20:/
458:260 30:30:30:30
500:625 20:20:20:/
550:620 20:20:20:/
550:748 20:20:20:/
550:748 20:20:20:/
630:870 20:20:20:/
550:1350 20:20:20:/
735:873 20:20:20:/
630:1790 20:20:20:/
REM