Hardware Installation; Software Installation - Conceptronic C480i5 Guía De Instalación Rápida

ENGLISH
A. Turn off your computer and disconnect the power cable.
B. Open the computer case on one side.
C. Make sure there is no PCI panel blocking the placement of the USB 2.0 PCI Card.
As example we have removed a PCI panel as shown in the picture below (1).
D. Insert the C480i5 firmly into a free PCI slot (2) as shown in the picture below.
3
E. Fasten the PCI bracket with a screw (3) (not included).
3.1 Windows 2000, XP and Vista installation
Windows 2000, XP and Vista will detect the C480i5 and install the driver
automatically; no additional steps are needed for installation.
3.2 Linux installation
Linux kernel 2.6.x and higher will detect the C480i5 and install the driver
automatically; no additional steps are needed for installation.
Your Conceptronic USB 2.0 PCI Card is now ready to use!

2. Hardware installation

1

3. Software installation

4
2