Quick Setup; Connection Diagram - ION Flash Cube Guia De Inicio Rapido

Quickstart Guide (English)
Introduction
1. Make sure all items listed in the Box Contents section are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
Box Contents
Flash Cube
Remote Control
1/8" Stereo Aux Cable
Quickstart Guide
Safety & Warranty Information Booklet
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit ionaudio.com.

Quick Setup

Connection Diagram

Items not listed in the Box Contents section are sold separately.
Second Flash Cube
Bluetooth Device
(smartphone, tablet, etc.)
Wireless
Stereo Link
Power
3
Aux Audio Source
(MP3 Player, CD Player,
Stereo Receiver, etc.)
Connecting to one Flash Cube:
1. Power on Flash Cube.
2. Press and Release the Bluetooth Connect button to enter Connecting Mode.
3. Navigate to your device's Bluetooth setup screen, find Flash Cube, and connect.
4. To disconnect, hold the Bluetooth Connect button on Flash Cube.
Note: The Bluetooth LED will be blinking if not yet connected.
Once connected, the LED will be solid.
AUX IN
Linking two Flash Cube units:
1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down
the Bluetooth Connect button for 3 seconds.
3. Press and Release the Link button on each Flash Cube.
4. Press and Release the Bluetooth Connect button on the Flash Cube
that you want to be the "master" (left channel).
5. Navigate to your device's Bluetooth setup screen, find Flash Cube, and connect.
The speakers will relink automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the
"master" Flash Cube for 5 seconds.
For detailed instructions, please see the included Quickstart Guide.
Power