Rear Panel
1.
Link: Press this button on both
speakers to link two Flash Cubes
1 2 3 4 5 6
together. Refer to Quick Setup >
Speaker Linking for more details.
7
2.
Link LED: When linking two Flash
Cubes, this LED will blink on both
Flash
Cubes
process.
Once
another Flash Cube, this LED will
remain solid on both Flash Cubes.
3.
Bluetooth Connecting: Press this
button to pair to your Bluetooth
device. For more details, refer to
Quick
Setup
Connecting with Flash Cube.
4.
Bluetooth LED: This LED blinks
when pairing with a Bluetooth device.
Once fully paired, the LED will remain
solid.
5.
Aux Input: Connect a media player, smartphone, or other audio source to this stereo 1/8"
input.
6.
Power Cable: This power cable is hard-wired into Flash Cube.
7.
Bass Port: Adds increased bass to the sound.
8
during
the
linking
fully
linked
with
9
>
Bluetooth
2 4
AUX IN
1
3
6
Connecting to one Flash Cube:
5
1. Power on Flash Cube.
2. Press and Release the Bluetooth Connect button to enter Connecting Mode.
3. Navigate to your device's Bluetooth setup screen, find Flash Cube, and connect.
4. To disconnect, hold the Bluetooth Connect button on Flash Cube.
Note: The Bluetooth LED will be blinking if not yet connected.
Once connected, the LED will be solid.
Linking two Flash Cube units:
1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down
the Bluetooth Connect button for 3 seconds.
3. Press and Release the Link button on each Flash Cube.
4. Press and Release the Bluetooth Connect button on the Flash Cube
that you want to be the "master" (left channel).
5. Navigate to your device's Bluetooth setup screen, find Flash Cube, and connect.
The speakers will relink automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the
"master" Flash Cube for 5 seconds.
For detailed instructions, please see the included Quickstart Guide.
6
7