Labels And Markings - 3M DBI-SALA Flexiguard M200 Manual De Instrucciones

7.0

LABELS and MARKINGS

7.1 LABELS: Figures 13 and 14 illustrate labels present on the Jib Boom. Figure 13 illustrates label locations and Figure
14 displays those associated labels. Labels must be replaced if they are not present or are not fully legible. Information
provided on each label is as follows:
The label present on Location A varies based upon whether your system allows one or two simultaneous users.
A
Label 9515103 - 1 user
Label 9515112 - 2 users
A) 3M Logo B) Applicable Standards C) Read all instructions.
D) Jib Boom Model Numbers and Weight Values E) Maximum Arresting Force 1,350 lbf (6 kN)
F) Capacity - Each user must have a combined weight (clothing, tools, etc.) of no more than 310 lb. (140 kg).
A) Manufactured (Year/Month) B) Model Number C) Serial Number
B
A) Engage the Locking Pin to prevent rotation of the system.
C
B) Disengage the Locking Pin to enable full rotation of the system.
C) Maximum System Rotation is equivalent to the limits allowed by engagement or disengagement of the pin.
A) 3M Logo
D
A) Fork Pocket Use Instructions
E
18