Steren MP4-300 Manual De Instrucciones página 32

7.- OPERATION
Save / music on the transmitter
1.- Using the USB cable (male-male), connect the transmitter to a computer. Wait for the computer to recognize
the device.
2.- Select the desired MP3 tracks or folders to transfer from your computer to the device using the traditional
drag and drop and copy/paste features on your computer.
3.- To disconnect the device safely, be sure to close all open folders and fi les, right click on the "Remove device
safely" icon located on the bottom right of your Windows taskbar and select the device to disconnect it safely
from the computer.
Once your computer indicates that you may safely remove the device, disconnect it from the USB port.
Do not disconnect the device while it is in use. Doing so may damage the device as well as important fi les
contained within. Steren is not responsable for any loss of data that may occur in this manner. Do not format
the device.
4 .- Follow the steps in the section titled Connection (page 9) to use the transmitter in your automobile.
5 .- The song will start playback automatically.
6.- Adjust the volume level using the +/- buttons of the remote controls or press and hole the buttons << (lower)
/ >> (raise) of the MP4-300.
7.- Press and to select other song.
8.- Choose your favorite music folder using the F- and F+ keys of the remote control.
12