Publicidad
•
Insert enclosed sponges in holes on door support and colour them
(e.g. with a flowmaster).
•
Adjust the cabinet door and push them against the appliance door
(sponges will leave the impression marks).
•
Remove the bar from the appliance.
•
Drill the holes on the spot where you have the marks, remove the
appliance door support and screw it on the cabinet door.
•
Hang the cabinet door back on the appliance door and fix it from the
top side.
(Fig. 4)
•
Fix the squares with screws on the furniture door.
•
Drill the holes into the cabinet door through squares and screw down
with the screws.
18
(Fig. 5)
(Fig. 6)
(Fig. 1)
142081
Publicidad
