1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Receptores para Coches
  5. 108-TO2
  6. Instrucciones de instalación

Metra 108-TO2 Instrucciones De Instalación

Toyota tacoma 2012-2015
Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Clock/Hazard housing • D) Panel Clips (4) • E) #4 x 3/8" Phillips truss head screws (6)
A
Metra. The World's Best Kits.
®
Toyota Tacoma
Visit
specific applications
KIT FEATURES
• Designed specifically for the Pioneer DMH-C5500NEX 8-inch radio
• 108-TO2B = Painted scratch resistant matte black
• 108-TO2CHG = Painted charcoal high gloss
B
C
MetraOnline.com
2012-2015
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
D
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench • Cutting tool
Attention!
E
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
108-TO2
Patent Pending
Let the vehicle sit with the key
REV. 8/29/19 INST108-TO2

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 108-TO2

Resumen de contenidos para Metra 108-TO2

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/29/19 INST108-TO2...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Unclip, unplug and remove the climate 4. Remove (8) screws securing the radio TEXT PWR VOL control panel. (Figure A) brackets to the radio, then remove the SCAN brackets. (Figure D) 2. Remove (4) 10mm screws securing the radio assembly.

  • Página 3: Kit Preparation

    (Figure B) larger aftermarket radio. Insert Clock/Hazard switch assembly from rear of 108-TO2 radio housing trim panel 3. Locate the factory wiring harness and Note: (4) panel clips have been (Figure A) antenna connector in the dash.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/29/19 INST108-TO2...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/29/19 INST108-TO2...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Soltar, desenchufar y quitar el panel de 4. Quite los (8) tornillos que sujetan los TEXT PWR VOL control de clima. (Figura A) soportes de radio a la radio, luego retire SCAN los soportes. (Figura D) 2.

  • Página 7: Preparación Del Kit

    (Figura A) grande. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS. Nota: (4) los clips del panel se han Pruebe la radio para un funcionamiento proporcionado, solo si los clips de fábrica...
  • Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER ® Mejore sus habilidades de instalación y...

Tabla de contenido