Dash Disassembly - Metra 108-TO2 Instrucciones De Instalación

1. Unclip, unplug and remove the climate
control panel. (Figure A)
2. Remove (4) 10mm screws securing the
radio assembly. (Figure B)
3. Unclip, unplug, and remove the radio
assembly. (Figure C)
2

DASH DISASSEMBLY

TEXT
PWR VOL
SCAN
(Figure A)
(Figure B)
TEXT
PWR VOL
SCAN
(Figure C)
4. Remove (8) screws securing the radio
brackets to the radio, then remove the
brackets. (Figure D)
5. Unclip and remove the clock/hazard
assembly from the radio assembly.
(Figure E)
6. Remove (3) panel clips from the radio
assembly.
Continue to Kit Preparation
(Figure D)
(Figure E)
|
1.800.221.0932 MetraOnline.com